Blog · The cut
How to reframe a horizontal video for vertical
· Updated · 5 min read
Short answer
A 9:16 crop keeps about 32% of a 16:9 frame’s width, so reframe shot by shot on a copy of the cut. Keep key things inside the platform’s safe zone: Google and Meta publish figures for vertical ads, TikTok publishes template files. When a subject won’t fit, cut between crops, stack two panels, fit the whole frame, or drop the shot.
On this page
The platforms also cover part of what’s left, so a single centered crop rarely survives a whole video.
How much of the frame do you keep?
About a third of the width. At the full height of a 1920×1080 frame, a 9:16 window is 607.5 pixels wide, or 31.6% of the frame.
| Source | Zoom to fill 1080×1920 | Source pixels used | Result |
|---|---|---|---|
| 1920×1080 (HD) | 178% | 607.5×1080 | Enlarged, so softer |
| 3840×2160 (UHD) | 88.9% | 1215×2160 | Reduced, stays sharp |
The narrow window also changes speed. A subject crossing a 16:9 frame in 3 seconds crosses the crop in about 1 second. Pace needs another look after reframing.
What are the safe zones on each platform?
Each platform covers part of the picture with its own interface, and what each publishes differs. These are as of November 2026, read on each platform’s own pages. All of them are for ads.
| Platform | Top | Bottom | Left | Right | What it says it covers |
|---|---|---|---|---|---|
| YouTube | 288 px (15%) | 672 px (35%) | 48 px (4%) | 192 px (18%) | Vertical video ads, at 1080×1920 |
| Instagram Reels | 14% (269 px) | 35% (672 px) | 6% (65 px) | 6% (65 px) | Reels video ads, 9:16, recommended at 1440×2560 |
| TikTok | No figure | No figure | No figure | No figure | In-feed ads: template files to download |
Our pixel conversions of Meta’s percentages assume 1080×1920. The notes matter as much as the numbers:
- YouTube. The figures come from Google’s ad reference, where overlays and buttons may sit in different places by format, campaign type and screen. YouTube’s Shorts upload help gives the shape, square or vertical, and a length of up to 3 minutes, and we found no safe zone there.
- TikTok. The page, last updated June 2026, gives no numbers for video. It says the safe zone depends on the video’s dimensions, the caption’s length and any added formats, and offers template files to download. It also warns that the preview may differ slightly from the live ad.
- Instagram. Meta’s help article adds two things. A Reels ad with a disclaimer should leave the bottom 40% clear. And on screens taller than 9:16, Meta may zoom the picture, cropping outside the safe zone, or put it on black.
What single box clears them all?
Take the larger margin from each published set and you get a box 823×960 pixels at 1080×1920: from x 65 to 888, and from y 288 to 1248. That’s our arithmetic, not a platform figure, and it can’t include TikTok, so lay TikTok’s template over it if you’re posting there.
The box is narrower than the crop. At HD, its 823 pixels hold only about 463 pixels of the source’s width. Faces, captions and products belong inside it. Backgrounds can run to the edges.
How do you reframe a cut?
- Duplicate the timeline. The horizontal cut stays your master.
- Change the frame. Set the copy to 9:16 and zoom each picture until it covers the frame.
- Go shot by shot. Put the eyes or the action inside the box. Start from what the shot is about, not the center of the frame.
- Use keyframes sparingly. A slow move to follow someone is fine. Two moves in one shot usually mean it should have been a cut.
- Reset text, don’t crop it. Titles and captions go back on from scratch, inside the box. Titles burned into the source are a reason to go back to the clean picture.
- Check the pace and the cuts again. Reframing changes what reads and how fast, and some trims will want redoing.
- Watch it on a phone with the platform’s buttons over it.
Automatic tools can give you a first pass. Premiere’s Auto Reframe identifies the action and reframes clips or a whole sequence. Resolve’s Smart Reframe, in the Studio version, picks the clip’s “most representative object” on Auto, or lets you draw a box around the subject. The most representative object may not be the one your scene is about, so check every shot.
What do you do when the subject won’t fit?
Work out what the shot is for, then pick the option that keeps it.
| The shot’s problem | Do this | What it costs |
|---|---|---|
| Two people far apart, talking | Cut between two crops of the same shot | A cut that wasn’t there. Placing it just off the line, as a J-cut or L-cut, hides most of that |
| Someone or something crossing the frame | Pan with it, or cut to a new crop as it leaves | The shot’s stillness, and the original camera move may fight yours |
| Two things to see at once, such as a presenter and a screen | Stack two panels | Scale. Each subject gets smaller |
| The width is the point: a landscape, a crowd, staging | Fit the whole frame | Most of the screen. Fill the rest with a blurred copy or plain color |
| None of these serves the shot | Drop it | A shot. A vertical version is a recut, and it needn’t hold every shot |
Three numbers for the stack and the fit:
- Split the stack at y 768, not at the frame’s center. Each panel then gets 480 pixels of height inside the box, so keep each subject close to the split. A split at the center, y 960, leaves the lower panel just 288.
- Each stacked panel keeps more width. Split at y 768, the top panel keeps 79% of a 16:9 frame’s width and the lower panel 53%, against 32% for a single crop.
- A fitted frame is smaller than it looks. Edge to edge it’s 1080×608, and it runs under the right-hand buttons. Inside the box it’s 823×463.
How does this work in nolanlabs?
Lite offers seven shapes in a menu in the picture panel, 16:9, 9:16, 1:1, 4:5, 4:3, and 2.39:1 and 2:1 for cinema, on the same project as Pro, and Fill zooms every picture until it covers the shape. In Pro, the Inspector sets zoom and position, Follow moves a clip with a tracked region, and an effect adds a blurred fill behind a picture that doesn’t cover the frame. Your agent can make a reframed copy of the cut, and it asks first unless you’ve set it to use everything without asking. One limit: the thin line in Lite’s viewer marks the frame’s edge, not any platform’s safe zone, so the box above is yours to check.