nolanlabs

Blog · The cut

Ripple, roll, slip and slide: what each one moves

· Updated · 5 min read

A red sliding door stands half open on a short steel rail in a bare plaster room.

Short answer

Ripple changes a clip’s length and moves everything after it, so the timeline’s length changes. Roll moves a cut between two clips. Slip changes which frames play inside a clip that stays put. Slide moves a clip with its frames intact while its neighbors give and take. Only ripple changes the timeline’s length.

On this page
  1. What does each trim move, and what stays?
  2. Which one do you reach for?
  3. What are the keys in Resolve, Premiere and Media Composer?
  4. Where does each one go wrong?
  5. How does this work in nolanlabs?

Each of these four trims moves one thing and protects another. The line about length is Blackmagic’s own: its Resolve 21 manual says ripple is the only one of them that changes the duration of the timeline.

What does each trim move, and what stays?

Take three clips of 48 frames each, A, B and C, for a timeline of 144 frames. Apply a 12-frame trim of each kind to B and watch the numbers.

Trim What moves What stays A / B / C after Timeline Needs handles on
Ripple (B’s head, shorter) B’s first frame, and C with everything after it A, and B’s last frame 48 / 36 / 48 132 Nothing to shorten; the trimmed clip to lengthen
Roll (A/B cut, later) The cut The total of A and B; C and everything after 60 / 36 / 48 144 A’s tail, or B’s head if the cut goes earlier
Slip (B, by 12) B’s source in and out, together B’s length and place; A and C 48 / 48 / 48 144 B, on the side the new frames come from
Slide (B, later) B along the timeline, same frames B’s length; the total of A and C 60 / 48 / 36 144 A’s tail, or C’s head if B goes earlier

Handles are the frames beyond the cut that the source has and the timeline isn’t using. The last column is why a trim sometimes refuses to go anywhere.

Avid’s Editing Guide gives the two limits people hit most: a slip stops at the end of the available material, and a slide stops at the next transition.

Which one do you reach for?

Ask what’s already right about the shot.

  • The line runs long, and everything after it should come earlier: ripple. This is pacing. It’s the trim to use when tightening a cut, and the one to be careful with once there’s music or a fixed length, because it moves what comes after.
  • Both shots are right, and the moment of change is wrong: roll. It leaves everything outside those two clips alone, so it’s safe in a 30-second spot that has to stay 30 seconds. Rolling picture alone over linked sound is how a J-cut or L-cut gets made.
  • The shot’s length and place are right, and the action inside lands late: slip. Say a cutaway sits on a beat, and the look in it comes 10 frames too late.
  • The shot’s contents are right, and it sits in the wrong spot: slide. A cutaway that covers the wrong word moves a few frames along the line, and the shots on either side absorb it.

What are the keys in Resolve, Premiere and Media Composer?

These are defaults, read on November 4, 2026, in each vendor’s newest document we could open. All three let you remap them.

Trim Resolve 21 (manual, July 2026) Premiere (Adobe help) Media Composer (guide, 2024.10)
Ripple T for the Trim tool, V for the nearest edit, U for one side, then , or . B for the tool Ripple Trim tool on the Timeline palette, then click a transition
Roll T, V, then , or . N for the tool Trim Mode button (dual-roller by default)
Slip T, Shift-V for the clip, S until it’s in Slip, then , or . Y for the tool; Ctrl+Alt+Left or Right, Opt+Cmd+Left or Right on Mac Drag a lasso right to left around the segment
Slide T, Shift-V, S until it’s in Slide, then , or . U for the tool; Alt+, or Alt+., Option on Mac Hold Shift+Alt, Shift+Option on Mac, and lasso right to left
Bigger step Add Shift: 5 frames Add Shift to the nudge keys: 5 frames Trim keys or buttons: 1 or 10 frames, 8 at 24p

Three things the table can’t carry:

  • Resolve’s words cross. In the manual’s keyboard steps, the line headed “To slide a clip” says the keys slip it, and the line headed “To slip a clip” says they slide its contents. Elsewhere the manual tells you to press S “if necessary” to get the mode you want. Try one frame first: if the neighbors changed length, you slid.
  • Avid doesn’t print letters. The guide shows the default keyboard as a picture and names no letter for these commands, so we haven’t given one. Hover over a key in Keyboard settings to read its name. The same guide says Keyboard settings also offers Premiere Pro and Resolve mappings.
  • Avid’s slip outside Trim mode needs mapping. The Slip Left and Slip Right buttons work in Source/Record mode, but they aren’t on the interface by default.

Where does each one go wrong?

Ripple can break sync. Resolve’s manual says ripple can alter the sync between clips on different tracks, while keeping long overlapping titles, graphics and music in place in most situations. Avid’s guide says a ripple trim can break sync with any unselected track. After you ripple under a music bed, check what moved.

Slip takes sound with it unless you’ve split them. Slipping a sync shot’s picture alone puts the lips out by exactly the frames you moved.

Roll and slide can eat a neighbor. Both shorten something you aren’t looking at. Take a neighbor down to a frame or two and it plays as a flash, so run a flash frame check before delivery.

A resize is none of these. Dragging a clip’s end with Resolve’s Selection tool overwrites a neighbor or leaves a gap, and the manual lists that as a fifth trim. If a gap has opened on your timeline, that’s probably what you did.

How does this work in nolanlabs?

In Pro, the keys follow Resolve: A selects, T trims, B is the blade. V picks the nearest edit, U changes which side of it, and , and . trim or nudge one frame, five with Shift. Dragging an end with the Trim tool ripples, and dragging a clip’s body slips it, or with Alt slides it. With the Trim tool and a clip selected, , and . slip it, and Alt+, and Alt+. slide it. If you’re coming from Premiere, B is the blade here, not ripple.

Blog

Keep reading.

Every piece

Written by the people who make nolanlabs, a video editor that edits with you.

Download for Mac Download for Windows Download

Free to start, on Mac and Windows.